https://andontap.com/2026-11-12 https://andontap.com/product/2026-11-12https://andontap.com/video/AndonTap_install_poster.jpgInstalling AndonTap on a CNC machineSnap AndonTap onto the DIN rail, power it from PoE or 24 VDC, wire the stack light, clip a CT on the spindle feed, and set it up from a phone over Bluetooth.https://andontap.com/video/AndonTap_install.mp4362026-11-12T08:00:00-07:00https://andontap.com/video/AndonTap_unboxing_poster.jpgWhat comes in the AndonTap boxUnboxing the AndonTap AT100 machine monitor: Quick Start Guide, label sheet, the module with its plugs fitted, the CT and the DIN-rail end stop in a recyclable kraft insert.https://andontap.com/video/AndonTap_unboxing.mp4152026-11-12T08:00:00-07:00 https://andontap.com/specs/2026-11-12 https://andontap.com/accessories/2026-11-12 https://andontap.com/downloads/2026-11-12 https://andontap.com/manual/2026-11-12 https://andontap.com/plc/2026-11-12 https://andontap.com/guides/2026-11-12 https://andontap.com/guides/monitor-older-cnc-without-mtconnect/2026-11-12 https://andontap.com/guides/stack-light-status-into-kepware/2026-11-12 https://andontap.com/guides/machine-state-into-studio-5000/2026-11-12 https://andontap.com/guides/andontap-vs-mtconnect/2026-11-12 https://andontap.com/demo/2026-11-12https://andontap.com/video/AndonTap_app_tour_poster.jpgAndonTap setup app tour: every screen, plus Kepware and Studio 5000 exportA narrated walk through every screen of the AndonTap setup app: connect, live view, stack light, spindle CTs, state rules, network and PIN, the register map, Kepware tag CSV and Studio 5000 UDT export, cloning a setup and updating firmware.https://andontap.com/video/AndonTap_app_tour.mp41702026-11-12T08:00:00-07:00 https://andontap.com/contact/2026-11-12