Documents and software
Everything for installing, setting up and integrating AndonTap V6. These are preliminary documents; check back here for the current revision.
Documents
User manual
V6 · preliminary rev 0.1 · firmware 1.5 · 181 KB. Safety, mounting, wiring, power, network setup, configuration, PLC and SCADA integration, firmware updates, troubleshooting. Print or save as PDF from the browser.
Quick Start Guide
V6 · preliminary rev 0.2 · 619 KB. The printed guide from the box: mount, wire, power, connect, LED check.
Software
Setup app cncmon_setup.html
Firmware 1.5 · 113 KB. A single file that runs in Chrome or Edge; nothing to install. Connects over USB-C or Bluetooth (Chrome on Android, Bluefy on iPhone). Sets up the machine, lamps, CTs, state rules and network, and exports the Kepware tag CSV and Studio 5000 UDT (.L5X) for each machine. Save it to a laptop to use it offline at the machine.
EtherNet/IP EDS file
Firmware 1.5 · 24 KB. For the Studio 5000 / RSLinx EDS wizard. Preliminary: it still carries the V5 product name, and the vendor ID is a placeholder until ODVA assigns one. A Generic Ethernet Module works without it (manual, section 11).
Firmware and network update tool
Firmware images for V6 hardware and the update tool will be posted here with the first production units. [to be posted]